As an Amazon Associate, I earn from qualifying purchases.

If your Blendjet light blinks red and purple, it may indicate a battery issue. Try charging it for a few hours, and then try turning it on.

If the issue persists, contact Blendjet customer support for further assistance. Having a Blendjet portable blender can make it easier to prepare your favorite smoothies and shakes on the go. However, when you encounter issues such as the light blinking red and purple, it can be frustrating.

We’ll discuss potential reasons for this issue and provide troubleshooting tips to help resolve it. By addressing the problem promptly, you can continue enjoying the convenience of your Blendjet blender without interruptions. Let’s dive into this common problem and find a solution to get your blender back in working order.

Blendjet Light Blinking Red And Purple


1. Understanding Blendjet Light Blinking

Blendjet light blinking is a common issue that many users encounter while using their portable blenders. Understanding why the Blendjet light is blinking can help you troubleshoot and resolve the problem efficiently.

Possible Reasons For Blendjet Light Blinking

  • Low battery charge
  • Overheating
  • Blade blockage
  • Incorrect assembly

Troubleshooting Blendjet Light Blinking

  1. Check battery charge and recharge if needed
  2. Allow Blendjet to cool down before using
  3. Inspect blades for obstructions and clear if necessary
  4. Reassemble Blendjet components correctly
Blendjet Light Blinking Red And Purple


2. How To Fix Blendjet Light Blinking

If your Blendjet light is blinking red and purple, don’t worry; we’ve got you covered with some easy fixes to get your blender back up and running smoothly.

2.1 Step 1: Check Battery Level

First, ensure your Blendjet has sufficient battery power by charging it fully before use.

2.2 Step 2: Reset The Blendjet

To reset the Blendjet, hold down the power button for 10 seconds until it turns off and back on.

2.3 Step 3: Clean The Blender

Regularly clean your Blendjet by disassembling the parts and washing them with mild soap and water.

2.4 Step 4: Contact Blendjet Customer Support

If the issue persists, reach out to Blendjet customer support for further assistance and troubleshooting.

Blendjet Blinking Red

3. Tips To Prevent Blendjet Light Blinking

The Blendjet is a handy portable blender that is perfect for those on-the-go smoothie lovers. However, sometimes you may encounter an issue where the Blendjet light starts blinking in red and purple, indicating a problem. To help you prevent this issue and ensure smooth blending experiences, here are four essential tips to follow:

Maintain Proper Charging Habits

One of the main reasons why the Blendjet light starts blinking in red and purple is a low battery. To prevent this, always keep your Blendjet charged properly.

  1. Charge your Blendjet fully after each use. Connect it to a compatible USB charger, and make sure to let it charge until the light turns solid green.
  2. Avoid overcharging. Once the Blendjet is fully charged, unplug it from the charger to prevent any damage to the battery.

Store The Blendjet Correctly

Proper storage of your Blendjet can prevent the light from blinking and extend its longevity. Here are a few tips:

  • Store your Blendjet in a cool and dry place, away from direct sunlight and heat sources.
  • Keep it in an upright position to avoid any leaks or spills that can lead to internal damage.

Avoid Overworking The Blendjet

The Blendjet has a specified maximum blending time to prevent overheating and damage. Follow these guidelines:

Ingredient Type Maximum Blending Time
Soft Fruits and Vegetables 45 seconds
Leafy Greens and Frozen Fruits 60 seconds
Ice Cubes and Hard Ingredients 90 seconds

Exceeding these blending times may cause the Blendjet to overheat and result in the light blinking red and purple. Give it a rest and let it cool down before continuing.

Regularly Clean The Blender

A dirty blender can cause the Blendjet light to blink due to sensor blockage. Ensure you clean it regularly.

  1. After each use, rinse the Blendjet with warm water and a small amount of mild dish soap.
  2. Use a soft brush to remove any leftover residue or stuck particles.
  3. Do not submerge the Blendjet’s base in water; only rinse the blending cup and blade assembly.

By following these tips, you can prevent the Blendjet light from blinking in red and purple and ensure a long-lasting and hassle-free blending experience.

4. Common Faqs About Blendjet Light Blinking

When your Blendjet light starts blinking red and purple, it can be quite concerning. To help alleviate your concerns, we have compiled a list of common FAQs about Blendjet light blinking to provide you with the information you need to troubleshoot the issue effectively.

4.1 What Does the Red and Purple Light Blinking Mean?

The red and purple light blinking on your Blendjet indicates that the battery is critically low. This double blinking pattern serves as a warning to recharge the blender to avoid complete power loss.

4.2 Can the Blendjet Still Function With the Blinking Lights?

While the Blendjet is designed to function with low battery warning signals, it is recommended to recharge the device promptly to ensure optimal performance and prevent unexpected interruptions during use.

4.3 Why Is the Blendjet Light Blinking Even When Fully Charged?

If your Blendjet light continues to blink red and purple despite being fully charged, it may indicate a potential issue with the battery or the charging connection. In such cases, try using a different charging cable or contact Blendjet support for further assistance.

4.4 How Often Should the Blendjet Be Cleaned?

To maintain hygiene and prevent clogging, it is advisable to clean your Blendjet after each use. This includes rinsing the blender with warm, soapy water and ensuring thorough drying before subsequent use to avoid bacterial growth.

Blendjet Light Blinking Red And Purple


Frequently Asked Questions For Blendjet Light Blinking Red And Purple

What Does Blinking Red and Purple Light on Blendjet Indicate?

The blinking red and purple light on your Blendjet may indicate a low battery. It’s a signal that it needs to be charged. Simply connect it to a power source to recharge, and the light should turn a solid color once fully charged.

How Long Does It Take for Blendjet to Fully Charge?

Typically, it takes around 1-3 hours for a Blendjet to fully charge. Once you connect it to a power source, the blinking red and purple light will turn to a solid color once the device is fully charged and ready to use.

What Should I Do If My Blendjet’s Light Keeps Blinking Even After Charging?

If the Blendjet’s light continues blinking after charging, try using a different power source or cable. Sometimes, a faulty power source or cable can prevent the device from charging properly. Alternatively, reach out to Blendjet’s customer support for assistance.


To sum up, resolving the issue of a Blendjet light blinking red and purple requires careful troubleshooting. By following the steps mentioned in this blog post, you can identify the possible culprits and resolve the problem. Remember to check the battery, ensure proper charging, and clean the device thoroughly.

By taking these measures, you can get your Blendjet back to its optimal function and continue enjoying your favorite blends effortlessly.

As an Amazon Associate, I earn from qualifying purchases.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *